Products Description




Company Information | |||
[email protected] | |||
Mobile | +8613666033393 | ||
+8613666033393 | |||
13666033393 | |||
Add | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China |
GE IS220PSVOH1B Mark VIe Series Servo Control Pack
Product Parameters
Parameter | Specification |
---|---|
Product Type | Servo Control I/O Pack |
Series | Mark VIe |
Input Voltage | 24 VDC (±10%) |
Dimensions | 150 mm (H) x 100 mm (W) x 50 mm (D) (typical for Mark VIe I/O packs) |
Weight | 0.6 kg (approximate) |
Network Interfaces | Dual Ethernet (ENet1/ENet2) |
Servo Channels | 2 channels (supports two servo valve position loops) |
Memory | Flash memory and RAM for configuration storage |
Temperature Sensor | Internal sensor for monitoring operating conditions |
LED Indicators | Power, Attention (Attn), ENet1/ENet2 status, ENA1/ENA2 |
Infrared Port | Present (non-functional in this model) |
Configuration Tool | Control System Toolbox (ToolboxST) |
Compatibility | TSVO servo terminal board, WSVO servo driver module |
Product Introduction
The IS220PSVOH1B is a high-precision servo control I/O pack designed for integration into GE’s Mark VIe control systems. It acts as an interface between Ethernet networks and servo terminal boards, enabling precise control of hydraulic or pneumatic actuators via servo valves. The pack supports dual Ethernet communication for redundancy and includes advanced diagnostics through LED indicators. Its modular design allows auto-reconfiguration upon replacement, minimizing downtime in industrial automation and turbine control applications.
The front panel features status LEDs for power, network health, and servo enable signals (ENA1/ENA2). The internal temperature sensor ensures operational safety, while the ToolboxST software simplifies configuration and troubleshooting.
Applications
- Industrial Automation: Control of hydraulic/pneumatic actuators in manufacturing processes.
- Power Generation: Turbine valve positioning in gas, steam, or hydroelectric plants.
- Oil & Gas: Precision control of valves in pipeline or refinery systems.
- Aerospace: Test rigs requiring servo-driven motion control.
- Heavy Machinery: Actuator management in mining or construction equipment.
Product Advantages
- Dual Ethernet Redundancy: Ensures continuous communication in critical systems.
- Auto-Reconfiguration: Reduces setup time during module replacement.
- Real-Time Diagnostics: LED indicators and temperature monitoring enhance reliability.
- Compact Design: Space-efficient for high-density control cabinets.
- ToolboxST Integration: Streamlines configuration and firmware updates.
- Compatibility: Works seamlessly with TSVO terminal boards and WSVO drivers.
Latest News Headline
“GE Mark VIe IS220PSVOH1B Enhances Servo Control Precision in Industrial Automation with Advanced Diagnostics and Redundancy Features”
Recommended Related Models (Same Series)
Model Number | Description | Key Parameters |
---|---|---|
IS220PTURH1B | Turbine Control I/O Pack | 24 VDC, 140x90x45 mm, 0.55 kg, 2 Ethernet |
IS220PDIAH1B | Digital Input/Output Pack | 24 VDC, 150x100x50 mm, 0.65 kg, 16 channels |
IS220PAICH1B | Analog Input Pack | 24 VDC, 150x100x50 mm, 0.6 kg, 8 channels |
IS220PVIBH1B | Vibration Monitoring Pack | 24 VDC, 150x100x50 mm, 0.7 kg, 4 channels |
IS220PDOAH1B | Digital Output Pack | 24 VDC, 150x100x50 mm, 0.6 kg, 16 channels |
IS220PROH1B | Relay Output Pack | 24 VDC, 150x100x50 mm, 0.65 kg, 8 relays |
IS220PTCSH1B | Temperature Control Pack | 24 VDC, 150x100x50 mm, 0.6 kg, RTD/TC inputs |
IS220PBSGH1B | Bus Interface Pack | 24 VDC, 150x100x50 mm, 0.6 kg, Profibus/Modbus |
IS220PCLAH1B | Communication Link Pack | 24 VDC, 150x100x50 mm, 0.6 kg, Fiber optic |
IS220PHMTH1B | HART Communication Pack | 24 VDC, 150x100x50 mm, 0.6 kg, HART protocol |
Top 10 Popular GE Models
Model Number | Product Type | Key Parameters |
---|---|---|
DS200TCCAG1A | Turbine Control Card | 125x90x30 mm, 0.3 kg, 32-bit processor |
IC693ALG392 | Analog Input Module | 24 VDC, 150x80x40 mm, 0.5 kg, 8 channels |
EX2100E108 | Excitation Controller | 480 VAC, 300x200x100 mm, 5.2 kg, Ethernet |
IS200VAICH1D | Analog Input Module | 24 VDC, 150x100x50 mm, 0.6 kg, 16 channels |
DS200DCFBG1B | Field Control Board | 24 VDC, 120x80x25 mm, 0.25 kg, CAN bus |
IC698CPE040 | PACSystem Processor | 1.2 GHz, 200x150x80 mm, 1.1 kg, 512 MB RAM |
DS200LDCCH1A | Load Commutation Card | 24 VDC, 100x80x20 mm, 0.2 kg, 6 channels |
IS215ACLEH2A | AC Link Interface | 24 VDC, 150x100x50 mm, 0.7 kg, Fiber optic |
DS3800HSEG | HART Signal Enhancer | 24 VDC, 90x60x25 mm, 0.15 kg, HART support |
IS220UCSAH1A | Controller Sync Module | 24 VDC, 150x100x50 mm, 0.6 kg, GPS sync |
FAQ
FAQ (Q&A)
Q1: Is the IS220PSVOH1B compatible with non-GE servo valves?
A1: Yes, but configuration via ToolboxST is required to match valve specifications.
Q2: How do I interpret the ENA1/ENA2 LEDs?
A2: ENA1/ENA2 indicate servo enable status. Solid green = enabled; off = disabled.
Q3: Can the infrared port be activated for diagnostics?
A3: No, the port is non-functional in this model.
Q4: What happens if the temperature sensor detects overheating?
A4: The Attn LED flashes, and a fault is logged in the control system.
Q5: Is manual reconfiguration mandatory after replacing the terminal board?
A5: Yes, terminal board replacement requires manual reconfiguration in ToolboxST.
Q6: Can firmware be updated remotely?
A6: Yes, via Ethernet using ToolboxST’s firmware update utility.
Q7: What is the maximum servo loop update rate?
A7: Typically 1 kHz, depending on network load and configuration.
Q8: Are spare WSVO driver modules sold separately?
A8: Yes, WSVO modules are available as standalone components.
Q9: How to test servo response without actuator movement?
A9: Use step current mode in ToolboxST to validate driver output.
Q10: Does the pack support third-party Ethernet switches?
A10: Yes, but GE recommends using certified industrial-grade switches.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.