Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 | |||
| Add | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China |
Technical Specifications
| Parameter | Details |
|---|---|
| Total Length | 1.0 meter |
| Weight | 0.23 kg |
| Scale Factor | 200mV/mil (7.87V/mm) |
| Linearity | Within 0.8 mils (0.02 mm) of a 200 mV/mil straight line |
| Frequency Response | 0 to 10 kHz (0 to 600,000 cpm) |
| Operating Temperature | Proximitor: -60°F to +212°F (-51°C to +100°C) |
| Probe Operating Temp | -30°F to +350°F (-34°C to +177°C) |
| Corrosion Resistance | Air, water, lube oil, ammonium hydroxide, sulfuric acid |
| Relative Humidity | Up to 95%, non-condensing |
FAQ
FAQ
Q1: What is the typical application of the Bently Nevada 7200 8mm proximity probe?
A1: This proximity probe is used for non-contact displacement measurements, typically in applications such as shaft position, vibration measurement, and radial or axial vibration in rotating and reciprocating machinery.
Q2: What materials is the probe construction made of?
A2: The 8mm probe is made of polyphenylene sulfide (PPS), a high-performance plastic that can withstand harsh, wet, and chemical environments.
Q3: What is the frequency response range of this probe?
A3: The frequency response range of the 7200 8mm probe is from DC (0 Hz) to 10 kHz (600,000 cpm).
Q4: Can this probe be used in hazardous locations?
A4: Yes, the Bently Nevada 7200 8mm probe is certified by CSA, BASEEFA, and FM for use in specific hazardous locations.
Q5: What is the calibrated range of this proximity probe?
A5: The calibrated range of the 7200 8mm proximity probe is 80 mils (2.0 mm), with a measurement start point approximately 10 mils (0.25 mm) from the probe face.
Q6: What is the maximum operating temperature of the probe?
A6: The probe can operate in temperatures ranging from -30°F to +350°F (-34°C to +177°C).
Q7: What is the power supply requirement for the proximitor used with this probe?
A7: The proximitor requires a power supply of -17.5 Vdc to -26 Vdc, with a maximum consumption of 12mA.
Q8: What materials are the cables made of for this proximity probe?
A8: The integral coaxial cable used with the probe is designed for durability and may include stainless steel armor for additional protection.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
