Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 | |||
| Add | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China |
Technical Specifications
| Parameter | Description |
|---|---|
| Module Type | Isolated Analog Input Module |
| Number of Channels | 6 isolated channels |
| Input Signal Ranges | Current: 0–20mA, 4–20mA, ±20mA Voltage: ±10V, 0–10V, ±5V, 0–5V, 1–5V |
| Resolution | 16-bit ADC converted to IEEE 32-bit floating point or 16-bit integer |
| Input Impedance (Voltage) | > 500 kΩ |
| Current Input Resistance | 250 Ω ±1% |
| Open Circuit Detection Time | 1 second max |
| Power from Backplane | 230 mA @ 5.0V (+5% / -2.5%) 320 mA @ 3.3V (+5% / -3%) |
| External 24VDC Supply | 500 mA @ 19.2–30 VDC |
| Power Dissipation | 2.97 W max with 20mA inputs on all 6 channels |
| Overvoltage Protection | ±35 VDC continuous |
| Overcurrent Protection | ±35 mA continuous |
| Channel-Channel Crosstalk | -70 dB minimum |
| Isolation | 250 VAC continuous / 1500 VAC for 1 min (channel-to-channel, to chassis) |
| Analog Step Response Time | 1.7 ms (0.1% of final value, excluding digital filter delay) |
| Digital Filter Options | 8Hz, 12Hz, 16Hz, 40Hz, 250Hz, 1000Hz |
| Filter Settling Time | 127ms (8Hz), 67ms (12Hz), 56ms (16Hz), 21ms (40Hz), 3.1ms (250Hz), 0ms (1000Hz) |
| Scan Rate | New sample every 1 ms |
| Accuracy | ±0.1% of range @ 25°C, ±0.2% over full temp. range |
| Noise Rejection (50/60Hz) | 100 dB (8Hz & 12Hz filters) |
| Diagnostic Functions | Open wire, over/under range, high/low alarms, short circuit detection |
| CPU Requirement | RX3i CPU with firmware version ≥ 5.0 |
| Programmer Requirement | Machine Edition ≥ Version 5.6 SP11 |
| Mounting | RX3i Universal Backplane |
| Dimensions (W x H x D) | 34 x 145 x 140 mm |
| Weight | 0.45 kg |
FAQ
Frequently Asked Questions (FAQ)
Q1: What types of input signals does the IC695ALG106-AA support?
A1: It supports both current (0–20mA, 4–20mA, ±20mA) and voltage (±10V, 0–10V, ±5V, 0–5V, 1–5V) input signals.
Q2: Can this module be used without an external 24VDC power source?
A2: No, it requires an isolated external +24 VDC power supply connected via the TB1 connector.
Q3: How is signal isolation handled between channels and the backplane?
A3: Each channel is isolated via I-coupler and transformer methods, offering 250 VAC continuous or 1500 VAC for 1 minute.
Q4: What digital filtering options are available for noise reduction?
A4: Six digital filter frequencies are available: 8Hz, 12Hz, 16Hz, 40Hz, 250Hz, and 1000Hz.
Q5: How often does the module update its input readings?
A5: It provides a new analog sample every 1 millisecond regardless of the selected filter.
Q6: Is there any built-in diagnostics for detecting faults on channels?
A6: Yes, it can detect open wires, over-range, under-range, short circuits, and alarm thresholds.
Q7: Does this module require calibration?
A7: Typical calibration interval is 12 months to maintain accuracy. Offset can be adjusted periodically.
Q8: What happens if the terminal block is not properly seated?
A8: The module will indicate a red LED (TB indicator) and disable channel operations until reconnected correctly.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
