Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 | |||
| Add | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China |
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Model | IC693PBM200-FE |
| Product Type | PROFIBUS DP Master Module |
| Supported Data Rates | 9600 bps to 12 Mbps |
| Maximum Number of Slaves | 125 |
| Maximum Input per Slave | 244 bytes |
| Maximum Output per Slave | 244 bytes |
| Total Input Data Limit | 3,972 bytes |
| Total Output Data Limit | 3,972 bytes |
| PLC Compatibility | GE Series 90-30 |
| CPU Firmware Requirement | Version 8.00 or later (10.60+ for large networks) |
| Programming Software Requirement | ME Logic Developer PLC v3.0 or later |
| Supported PLC Modes | RUN, STOP IOScan (enters Clear Mode when not scanning I/O) |
| Sync/Freeze Modes | Supported (sync/freeze bits optional) |
| LED Indicators | COM and SYS (PROFIBUS compliant) |
| Firmware Updates | Via dedicated service port |
| Certifications | PTO, CE, CUL Class 1 Div. 2 Groups ABCD |
| Dimensions (W x H x D) | 140 x 140 x 35 mm |
| Weight | 0.2 kg |
| Configuration Interface | Logic Developer-PLC Data View & I/O Config Tabs |
| Diagnostic Data Handling | Retrieved via COMM_REQ block |
| Sync/Freeze Control Bits | 16 fewer than HE693PBM101, now optional |
| Diagnostic Word Structure | Optional 2-word input (includes Module Revision and Slave Diag ID) |
| Operating Systems for Development | Windows NT 4.0 SP4+, 2000 Pro, XP, 98 SE |
| Development Hardware Requirements | Pentium 200 MHz or higher, 128MB RAM, up to 336MB HDD for full install |
| Configuration Memory Limits (CPU dependent) | Up to 245,760 bytes total (CPU model dependent) |
| Individual Module Memory Limit | Up to 16,572 bytes (depending on CPU model) |
| HHP Compatibility | Not supported with IC693PRG300 |
FAQ
Frequently Asked Questions (FAQ)
Q1: What CPUs are compatible with the IC693PBM200-FE module?
A1: The module is compatible with GE Series 90-30 CPUs. CPU firmware version 8.00 or higher is required, and version 10.60 or later is recommended for large network configurations.
Q2: How many PROFIBUS DP slave devices can be connected to this module?
A2: The IC693PBM200-FE supports up to 125 PROFIBUS DP slave devices.
Q3: Can the module be configured using a Hand-Held Programmer (HHP)?
A3: No, the IC693PBM200-FE does not support configuration using the IC693PRG300 Hand-Held Programmer.
Q4: What is the maximum amount of data that can be exchanged between the CPU and this module?
A4: The module supports up to 3,972 bytes of input data and 3,972 bytes of output data between the CPU and the module.
Q5: What is the behavior of the module when the PLC is not scanning its I/O?
A5: When the PLC is not scanning I/O, the IC693PBM200-FE enters Clear Mode and sends zeroed data to all configured slaves.
Q6: Are firmware updates supported on this module?
A6: Yes, firmware updates are supported via a service port located on the module.
Q7: Does this module support Sync and Freeze functions?
A7: Yes, it supports both Sync and Freeze modes; however, sync/freeze control bits are optional and fewer in number compared to older models.
Q8: What development software and system are required to configure this module?
A8: ME Logic Developer PLC software version 3.0 or later is required. Supported operating systems include Windows NT 4.0 (SP4+), Windows 2000 Professional, Windows XP, and Windows 98 SE.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
